Sensors
On this page
Recommendation
DependsOn a desktop PC, disable it: there is no sensor stack, it powers no visible features, and BoosterX recommends this setting for desktop machines.
On a tablet or laptop with auto-rotate and auto-brightness, first check that they work.
- Main effect
- Disabling sensors and location
- FPS and memory
- See the research
What changes
Section titled “What changes”According to the visible description, the BoosterX setting disables all location and sensor features: GPS, Wi-Fi triangulation and other location-based services, as well as the gyroscope, accelerometer and pedometer. The system sensor stack is no longer available to apps, so on devices with sensors the dependent features are lost: auto-rotate no longer responds to the tilt of the chassis, and auto-brightness no longer adjusts based on the ambient light sensor. The disabling itself is not a CPU optimization: the sensor stack usually does not create constant background activity.
Exceptions and differences
Section titled “Exceptions and differences”A desktop PC usually does not have these sensors, and there are no visible losses. The setting overrides the effects of “Windows Location Provider”: that one disables only coordinate detection, while “Sensors” disables the entire sensor stack, including motion. Permissions for specific apps are a separate setting, “App access to location”. BoosterX supports this setting in Windows 10 and Windows 11.
How to verify the result
Section titled “How to verify the result”On a device with sensors, apply the setting, then rotate the tablet or laptop: the screen should not rotate. On a desktop PC there is nothing to check — there are no sensors, which confirms that disabling is safe.
How to change and revert
Section titled “How to change and revert”Open “Optimization” → “Privacy” → “System privacy” → “Sensors”, and switch the toggle to “On”: BoosterX will apply the disabling of location and sensor features. Click “Apply”. If “Instant apply” is enabled, a separate button is not required. To revert, switch the toggle to “Off” and apply the change again: BoosterX will restore the default Windows state with a working sensor stack.
Confirmation
Section titled “Confirmation”- Microsoft: Manage connections from Windows operating system components to Microsoft services, sections about location and sensors, checked 2026-09-19.
- Privacy policy research.
Last checked: 2026-09-19.